OHRIJA electric wheelchair charger 24V 10A charger makes it suitable for 27.6V Lead Acid batteries

Warning

Please confirm the required parameters, input plug and output connector. If you cannot confirm, please do not purchase or contact customer service for support. Thank you!
1. Do not use in high temperature, dark and humid environment
2. Keep it in a ventilated environment
3. Keep it away from flammable and explosive items

Product Parameters

Product model: HRH300
Product material: aluminum alloy shell
Output voltage: maximum 27.6V/29.4V±0.2v
Output current: maximum 10Amp ±0.2a
Product size: 135*90*50MM 0.9kg
Applicable battery type: 24V Lead Acid battery
Working power: maximum 290W
Color: black,silver，red，blue，green optional
Input plug: US, EU.UK.AU (select the correct plug according to local standards)
Output connector: XT60 | XT90 | Crocodile Clip | Anderson 50A | Wire Nose | DC5.5*2.5 | GX16 1+3- | XLR | IEC C13 | 45A (select the correct connector according to the battery port)
Package: charger*1, DC 1m output cable*1, input cable 1m*1, instruction manual*1

Product Introduction

1.Efficient Charging
Adopting advanced switching power supply technology, the charging efficiency is as high as 85% or more, shortening the charging time and reducing energy consumption.
2.Constant voltage and constant current charging mode
The charger works in constant current (CC) mode until the battery voltage approaches the set value (27.6V), and then switches to constant voltage (CV) mode to ensure the safety of the charging process and avoid overcharging.
3.Intelligent temperature control 
The built-in temperature sensor can monitor the charger temperature in real time. When the temperature exceeds the safe range, it automatically reduces the charging current or suspends charging to prevent overheating.
4.Multiple protection functions
· Overvoltage protection: When the voltage exceeds the safe range, the charger automatically cuts off the power to prevent battery damage.
· Overcurrent protection: When the current exceeds the rated value, the output current is automatically limited to protect the battery and charger.
· Short circuit protection: The charger has a short circuit protection function to avoid dangers caused by short circuits.
· Reverse connection protection: When the positive and negative poles of the battery are reversed, the charger automatically stops working to avoid damage to the battery and charger.
5 LED indicator lights
The charger is equipped with LED indicator lights to display the current charging status:
· Red light: Charging.
· Green light: Charging completed or standby.
6 Voltage and current can be calibrated
· The adjustable resistor VR2 can calibrate the current between 8 and 10 amps
· The charger needs a battery voltage of at least 13V to work
· The charger can directly output voltage and current for use as an adapter

tractor supply fence charger Applicable devices

· This 24V Lead Acid battery charger is designed for electric wheelchair,  and other Lead Acid battery devices. The charger uses high-efficiency conversion technology to ensure · fast and safe battery charging and extend battery life.
The charger is only suitable for 24V Lead Acid  batteries, electric wheelchair charger and other 24V Lead Acid battery devices.tractor supply fence charger.

Charging time

· The 24V 10A lead-acid battery charger is designed for fast charging of 24V lead-acid batteries and can charge 24V lead-acid batteries at a rate of 10 amps.
· The maximum voltage is 27.6V when no battery is connected, and the maximum voltage is 29.4V when charging. The rated current is 10Amp, which can fully charge a 30Ah lead-acid battery in about 3 hours and a 50Ah battery in about 5 hours. A 80Ah battery can be fully charged in 8 hours. For smaller batteries (<10Ah), we recommend using a 5A charger. All lead-acid batteries should be charged with a charger compatible with lead-acid batteries, such as this charger. Charging the battery with other types of chargers will reduce the performance and life of the battery.

Frequently asked questions

1. Not working
· Check if the AC input voltage is 110 or 220V
· Check if the input AC terminal is connected correctly and if the fuse is damaged
· Check if the output connector is connected correctly, if it matches, and if the fuse is damaged
· Check if the BMS system is protected
2. How loud is the noise
Since there is a fan inside the charger, the noise is about 40-60 db